Portable multifunctional flashlight VIDEX VLF-M044UV 400Lm 4000K

Portable multifunctional flashlight VIDEX VLF-M044UV use is multi-purpose, thanks to the variety of functionality of the flashlight. It is used mainly in the dark or in rooms without lighting.

The maximum brightness is 400Lm. It uses a CREE xte 5W (6500K) led for the front light and a COB 10W (4000k) led for the side light. The latter works in three colors - white light, red and ultraviolet.

Features:

- Vertically movable head part within 270 degrees.
- The flashlight has two separate light sources.
- Side light source (COB) has three types of light: white light with a high color rendering index (Ra>95), red constant or signal light, ultraviolet light.
- White light with smooth brightness change function.
- Built-in magnet and metal loop allow you to attach the flashlight in many ways.

OPERATING MODES:

Top - (front light) white light mode.
COB White-white light mode of the COB lamp.
COB Red op-red light mode of the COB lamp.
COB Red Flash-mode of red flashing light of the COB lamp.
COB UV - mode of ultraviolet light of the COB lamp.

INSTRUCTIONS FOR CONTROLLING THE FLASHLIGHT:

- Short press of the "ON/OFF" button – turn on the light, switch between "Top" and "COB White" modes and turn off the light.
- Long press the "ON/OFF" button when the White Light is on - adjust the brightness.
- Double-click the "ON/OFF" button – enable the group of "COB Red on", "COB Red Flash" and "COB UV"modes. Short press to cycle between these modes. Double-tapping again turns off the flashlight.

BATTERY STATUS INDICATION

When the light is off, press and hold the button for 2 seconds to see the battery level. The display will continue as long as you hold down the button.

The battery status is also constantly displayed when the indicator is turned on.

- 5 divisions - ≤100% charge;
- 4 divisions - ≤80% charge;
- 3 divisions - ≤60% charge;
- 2 divisions - ≤40% charge;
- 1 Division - ≤20% charge;
- 1 Division flashes – the battery is low.

CHARGING THE BATTERY

Turn off the flashlight, open the protective cover, and connect the charging cable to the flashlight's USB-C port. During charging, the indicator divisions flash alternately. When fully charged, all 5 divisions of the indicator light up constantly. After fully charging, disconnect the charging cable and close the protective cover to prevent water and dust from entering the flashlight body.

The original batteries are supplied charged and can be used immediately after purchase, but it is recommended to fully charge the battery before using it for the first time. The battery must be charged in time until it is completely discharged. During long-term storage, it is recommended to maintain the battery charge by about half to extend its service life.

The flashlight is guaranteed for 3 years and the battery is guaranteed for 1 year. The warranty does not cover accessories.