Dimmable LED lamp Recessed Square VIDEX 12W 5000K D3

LED luminaire with dimmable recessed square VIDEX 12W 5000K
VIDEX recessed luminaire is a source of high-quality lighting and consumes much less electricity. It does not heat up and therefore goes well with suspended or stretch ceilings, and installation will not cause difficulties even for a non-professional. Has a modern design. All lamps are distinguished by their environmental friendliness. The luminaires are supplied assembled with mounting brackets. Ready to install right out of the box. Its dimensions are only 172x172x21mm. After installation, it does not require maintenance during the entire period of operation.

The luminaire has a light output of 80lm/W. The total luminous flux is 960Lm. Produces a pleasant, uniform light. There is no flicker during operation of the luminaire, thus reducing the burden on eyesight. Color temperature - 5000K (as close as possible to daylight). The angle of light diffusion is 120°, which allows high-quality lighting of the room.

The VIDEX luminaire offers the possibility of simple and convenient dimming. But the main thing is that this opportunity opens up without any additional devices or costs. Light dimming is set using a standard switch. The design of the luminaire provides for the possibility of using it in three positions: 100%, 50% and 10% of its maximum brightness.

When a dimmable luminaire is turned on, the default operation is 100% of its maximum value.
- To change the brightness to a level of 50% of the maximum, it is enough to turn off and turn on the light for 3 seconds. The brightness level will change.
- If you turn off the lamp and turn it on within 3 seconds, the brightness level will be set again to 10%.
- If you switch it off and on again, regardless of the time interval, the brightness will return to 100%.

Resistant to a large number of on and off (100,000). Service life - 30,000 hours. It will serve for a long time, which is confirmed by the guarantee - 2 years. Only safe materials are used in the manufacture.

When connected directly to the mains, it will provide stable operation during voltage drops. Working voltage 175-250V.