LED emergency luminaire TITANUM 60 LED 6500K

LED emergency lighting lamp TITANUM TL-EM1108-designed for lighting emergency and evacuation exits. It is widely used in everyday life for lighting utility rooms, non-residential premises, service stations, as well as as a portable lamp used for lighting during outdoor recreation and traveling. The luminaire is designed for permanent use. The lamp body has extendable slots for mounting/mounting on a flat surface. It acts as a backup lighting in the absence of voltage in the supply network. A special feature of these lamps is the built-in battery, which will allow you to work independently. The lamp has a built-in battery charge indicator located next to the lighting mode switch. It has a long service life. It does not contain mercury. It operates in two modes: emergency bright light and Emergency economy.

Connect the power cable, which is located on the back of the lamp, to the 220-240V network. After connecting to the outlet and having power in the network, a red LED will flash on the lamp body, which will indicate that there is electricity in the network and that the process of charging the battery is in progress. The battery is fully charged in approximately 18 hours.

To start working with the lamp, set the switch to one of the lighting modes: emergency bright light (HIGH), emergency Economy Light (LOW) or off (off). The luminaire only works when there is no mains power or when it is disconnected from the mains for portable use. To check the operation of the lamp at the current mains voltage, set the lighting mode switch to one of the operating modes (HIGH, LOW) and press the TEST button, which is located to the right of the Switch.

If the lamp is not used for a long time, it is necessary to periodically charge the battery for at least 10 hours every 3 months. It is recommended to charge the battery after each use.